E-Mail
FLEXCOAT Questions and
Product Support
E-MAIL:
FLEXCOAT QUESTIONS AND
PRODUCT SUPPORT
E-MAIL:
FLEXCOAT OFFICE
PRODUCT SUPPORT
Links to on-line
stores
that sell Flexcoat Products
E-Mail
FLEXCOAT Questions and
Product Support
Rod Finishing Equipment
FLEX COAT Professional OEM Power Drying Unit
Holds 4 rods, wall mounted, suitable for tackle shop repair operations or stackable for mass production OEM purposes. Continuous duty 6 RPM or 18 RPM motor standard. On-off lights and switches.
4X-6......FLEX COAT 6 RPM Dryer
4X-18..FLEX COAT 18 RPM Dryer
FLEX COAT OEM
Power Finishing Machine
Designed for commercial rod manufacturers
who need a smooth running, high speed finishing machine. The
sliding tray and hand rest, free spinning roller supports and
self-adjusting chuck allow effortless application of finish.
Commercial USA built motors. Instructions for assembly included.
FM200..........FLEX COAT 200 RPM OEM Power Finishing Machine
BR72
FLEXCOAT Cordless Finishing Motor II
This unit features a high quality, made in the USA,
7 RPM motor with self adjusting chuck for rotating a rod while applying
and curing Flex Coat Rod Finish. Equipped with a convenient on/off
switch and powered by 4 AA batteries, not included.
BR72.......FLEXCOAT
Cordless Finishing MotorII
FLEX COAT Finishing Motors
High quality USA built gear motors with self-adjusting chuck
for rotating rod while applying
and curing Flex Coat finish.
6 RPM model for applying finish
to rods with underwraps.
18 RPM is good for general use
GM6......FLEX COAT 6 RPM Finishing Motors
GM18....FLEX COAT 18 RPM Finishing Motors
BR72
FLEXCOAT Cordless Finishing Motor II
This unit features a high quality, made in the USA, 7 RPM motor with self adjusting chuck for rotating a rod while applying and curing Flex Coat Rod Finish. Equipped with a convenient on/off switch and powered by 4 AA batteries, not included.
BR72.......FLEXCOAT Cordless Finishing MotorII
FLEX COAT Finishing Motors
High quality USA built gear motors with self-adjusting chuck
for rotating rod while applying
and curing Flex Coat finish.
6 RPM model for applying finish
to rods with underwraps.
18 RPM is good for general use
GM6......FLEX COAT 6 RPM Finishing Motors
GM18....FLEX COAT 18 RPM Finishing Motors
FLEX
COAT Slip Clutch
This slip
clutch can be attached to any finishing motor with a 1/4" shaft
and enables you to stop the rod without stopping the motor during
Flex Coat application. This is essential
for rod inspection and important touch ups with high speed motors
of 60 to 200 rpm. It also makes coating guides with under-wraps a
snap. The Flex Coat Slip Clutch
is used by many of the high production rod manufacturers.
FLEX COAT 1
to 1 Dispenser
A highly dependable professional dispensing
system which will assure accurate measurement of resin and hardener
every time.
For use with Flex Coat Finish and Epoxy Glue
1:1 Ratio
Durable long lasting construction
Two one half gallon see thru reservoirs
Dispenses 9 cc or less of each part per stroke
Optional Heater available
NOTE: Recommended for
manufacturers using at least 1 gallon of Flex Coat per month.
P1000A....FLEX COAT 1 to 1 Dispenser
FLEX
COAT Slip Clutch
This slip clutch can be attached to any finishing motor with a 1/4" shaft and enables you to stop the rod without stopping the motor during Flex Coat application. This is essential for rod inspection and important touch ups with high speed motors of 60 to 200 rpm. It also makes coating guides with under-wraps a snap. The Flex Coat Slip Clutch is used by many of the high production rod manufacturers.
FLEX COAT 1
to 1 Dispenser
A highly dependable professional dispensing
system which will assure accurate measurement of resin and hardener
every time.
For use with Flex Coat Finish and Epoxy Glue
1:1 Ratio
Durable long lasting construction
Two one half gallon see thru reservoirs
Dispenses 9 cc or less of each part per stroke
Optional Heater available
NOTE: Recommended for
manufacturers using at least 1 gallon of Flex Coat per month.
P1000A....FLEX COAT 1 to 1 Dispenser
